Waveware Call Manager Bedienungsanleitung PDF herunterladen (Seite 27)

STEP 9 – Register Call Devices – Wireless Inovonics

Configuring the “Inovonics Wireless System Input Port”

Configured for use as a Universal Transmitter - “Terminal” Device (Ex: Contact Closure)

Choose the “Inovonics EN Wireless System Input Port”. See Fig. 40-2 “B”

To “Register Call Devices” simply “Trigger” the Device and wait until you see it on the Screen. See Fig. 40-2 “A”

NOTE: Trigger one Device at a time and wait a Few Moments until the System “Acknowledges” the Device.

Fig. 40-2

In this Example the Device is being used with a Contact Medical Device.

This model Universal Transmitter only has a “Terminal” Block, so when the

Device is Triggered and Reset, the Device will send out a Signal to the Central

Receiver which is attached to the Call Manager Software. The Call Manager

Software sends an Alert Message out to the Assigned Msg Recipient (Pager).

Fig. A:

Trigger the Wireless Call

Device and wait a Few

Moments.

The New Device should be

Displayed on the Screen.

After the Device is Shown, you

can Choose:

-The “Device Type”

-The “Room”

Do this for Every Device Type

Registered.

Note: You can Assign the

Room at a Later time, if you

wish.

Fig. B:

Choose One:

-Call System Input Port

-Inovonics EN Wireless System

Input Port

Here in this Example we are

Working with the Inovonics

Wireless System Input Port to

Fig. C:

Choose Call Processing:

In this Example the Universal

Transmitter is used as a

Contact Closure.

For this Purpose the Call

Processing should be set to

“Terminal” for Both Initiation

and Cancelation.

You can also Assign an

“Installer” Pager, to be used for

Testing during this Time.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Waveware Call Manager Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Waveware Call Manager