Waveware Alert Utility Bedienungsanleitung PDF herunterladen (Seite 21)

Step 2 – Configuration – Output – TAP Paging System

To use “TAP Paging Systems” for an Output, you will need to Configure the Paging System(s) that will be used

with this Application. To Add a TAP Paging System, Place a Check Mark next to “TAP Paging System(s)” and

then Click on the “Configure Paging System(s)” Button. See Fig. 24

In the TAP Configuration Screen you can Add, Edit, Delete and Test each Paging System Configuration.

Click the “ADD” Button in the Configuration Screen to Add a Paging System. See Fig. 25

Fig. 24 TAP Paging Systems Output

Click on the “Configure Paging System(s)” Button

Fig. 25

Tap Paging System Configuration Screen

Enter a Description to be used as a “Reference”.

Enter a “Com Port Number” or an “IP Address” that will be Assigned to the Paging System. See Fig. 26

Highlight the Configuration you want to Edit, Delete or Test.

If assigning a Com Port you can also configure the Com Port Settings for each system. See Fig. 27

Fig. 26

Add a TAP Paging System using an IP Address

Fig. 27

Multiple Paging System Output Assignments

Next: Step 2 – Output Configuration – Internet E-Mail (SMTP)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Keine Kommentare

Waveware Alert Utility Bedienungsanleitung Seite 21