Waveware Repeater Bedienungsanleitung PDF herunterladen (Seite 9)

TRANSMITTER PROGRAMMING SOFTWARE

Repeater Programming

July 16, 2009 7

REPEATER

Repeater Programming

Introduction

Please follow the below steps for programming Repeater：

1. Connect Repeater to a PC

2. Identify the COM Port that is being connected to.

♦ If you are using a Serial Port as your connection to the PC, please make sure it is

connected to COM1 or COM2.

♦ If you are using a USB-to-Serial connection and have installed the driver for

USB-to-Serial connection, the 「Prolific USB-to-Serial Comm Port」 will appear

under Ports (COM&LPT). The following screen gives an example of the systems

detects a USB-to-Serial connection is being connected to COM3. It appears

Prolific USB-to-Serial Comm Port (COM3).

♦ If 「Prolific USB-to-Serial Comm Port」 does not appear, please refer to the

instruction for installation on USB connection.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Keine Kommentare

Waveware Repeater Bedienungsanleitung Seite 9