Waveware API-8 Alarm Monitoring Bedienungsanleitung PDF herunterladen (Seite 28)

RS232 data transferred - API-8/232 is not

receiving data from host system

on host system

API-8/232 Not programmed to Accept

RS232 Data

RS232 Cable connected to incorrect port

on API-8/232

Incorrect Cable configuration

host system using manufacturers

instructions. Note: Program API-8/232

“Terminal Settings” in the “RS232

Setup” Menu to match those of the host

system.

Program API-8/232 to accept RS232

ASCII Data. In the “RS-232 Setup”

Menu select “Serial Data. Program

“Terminal Settings” in the “RS232

Setup” Menu to match those of the host

system.

Connect RS-232 cable from the host

system to the “Serial Port In” connector

on the API-8/232 (see connection

Diagram, page 3-1).

From the host System Connect the Tx to

the Rx on API-8/232 (Pin 3) From the

host System Connect the Rx to the Tx on

API-8/232 (Pin 2). From the host

System Connect the Gnd to the Gnd on

API-8/232 (Pin 5).

RS232 DATA NOT BEING PAGED

“DATA” LED illuminates and Paging

sequence is not initiated when RS232

data transferred - API-8/232 is receiving

data from host system but is not paging

information

Incorrect Data Type Selection in RS232

Setup Menu

Incorrect Terminal Settings in API-8/232

“RS232 Setup” Menu

If Keystrrings are enabled, Incoming

Data does not contain a match for any of

the Keystrings programmed in the RS232

Setup Menu. Important Note: Keystrings

are case sensitive (API-8/232 will only

identify Keystrings which are an exact

match for strings contained in incoming

Data).

Data is not RS-232/ASCII or is of some

unknown format or utilizes unknown

protocol.

To Program API-8/232 to accept RS232

ASCII Data: In the “RS-232 Setup”

Menu select “Serial Data”.

Program “Terminal Settings” in the

“RS232 Setup” menu to match those of

the host system.

Program “Keystring” Fields in the “RS-

232” menu to identify text that is found

within the events generated by the host

system that are to be paged.

Connect API-8/232 to an RS-232 port

that provides ASCII data strings for event

reporting purposes.

PAGE 5-4

API-8/232 LED INDICATORS

1. Uploading or Downloading Programming Information:

G

E

L

L

R

N

E

S

Y

TA

A

D

B

L

G

E

L

L

WR

N

E

S

Y

TA

A

D

B

L

G

E

L

L

WR

N

E

S

Y

TA

A

D

B

L

1 2 ... 23 24 25 26 27 28 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare