Waveware Adaptive Serial LED Clock Bedienungsanleitung PDF herunterladen (Seite 7)

ALPHA Serial Clock Manual

Introduction

The Alpha

serial clock displays the time in either 12-hour or 24-hour

mode using a 4-inch LED display. The clock can be used all by itself or it

can be networked with other Alpha

clocks or Alpha

signs. In a

network, one clock (or a PC attached to the network) is used to

synchronize all the other clocks to the same time.

Used by itself, the Alpha

serial clock should be set to master mode. In

a network composed of all Alpha

serial clocks, one clock should be set to

master mode and the other clocks set to slave mode. In a network with a

PC that is connected to Alpha

clocks and Alpha

signs, all the clocks

should be set to slave mode.

Power supply (AC adapter)

The clock is equipped with a small AC adapter with an 18-foot power

cord. Connect the power cord to the adapter plug receptacle on the

backside of the clock (See Figure 1: Serial Clock—Rear Panel) before

plugging the adapter into a standard 120V wall outlet.

Figure 1: Serial Clock—Rear Panel

6” spacing

Keyhole slotKeyhole slot

Bright/Dim switch

12/24 Hour switch

Master/Slave switch

Adapter plug

receptacle

Serial Jacks & DIP switch

(remove screw/plate)

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Keine Kommentare

Waveware Adaptive Serial LED Clock Bedienungsanleitung Seite 7